Gyprich Plaster Bonding Solution

Gyprich BOND-GF is a bonding agent for Gypsum plaster & Sand cement plaster that enables preparation of Ceiling and wall surfaces (especially RCC surfaces) within 24 hours. Gyprich BOND-GF eliminates risk of deboning gypsum plaster or sand cement plaster from ceiling (RCC surface) due to its low suction background and continuously under pressure of gravity. It enables dual benefits of mechanical and chemical bonding, and completely eliminates the labour intensive hacking process and the risk of plaster de-bonding.

Gyprich BOND-GF increases pull out strength by 5 times against conventional hacking process. New technology like aluminum formwork shuttering needs products like Gyprich BOND-GF to provide adhesion of Gypsum plastering.

FEATURES

AREAS OF APPLICATIONS

RCC Columns

Beams

Concrete Surface

Slabs

Sheer Walls

BENIFTS

Application Procedure

Surface on which BOND-GF application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of BOND-GF, prewetting must be done with the help of a brush/roller.

Mixing

Mix material properly with clean rod to properly distribute solid particles in the solution.

Application

Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.

Application instructions