Gypsum Plaster

GYPRICH GLASS FIBER MESH

Gyprich Glass Fiber Mesh is a solution which guarantees excellent protection from cracks at different joints and conduits

  • Gyprich Glass fiber mesh is used in Beam and column joints, Plumbing and electrical work, chasing areas, doors and windows joints.
  • Neatly woven, crisscross pattern of fiberglass from E-glass woven and further coated through copolymer. Gyprich Glass Fiber mesh does not decompose and will not rust over time.
  • High quality material with tensile strength which does not permit the structure to move freely in case of hairline cracks, disjoints etc. It also resists high temperature, corrosion and environmental humidity.
  • Ideal building material for reinforcement and is widely used in joints before Gyprich Gypsum Plastering and traditional Sand – Cement plastering.

Areas of Application

  • Beam & Column Joints
  • Plumbing and Electrical work Chasing areas
  • Areas with thin plaster
  • Door and Window joints

How To Apply

  • Make the surface clean, free of debris and oil. Chasing should be completely filled
  • Apply the first layer of base coat over the entire surface.
  • Apply the mesh from the top to the bottom of the wall by pressing it into the first layer of the base coat (starting from the centre then out to the side).
  • Apply the rest of the base coat keeping the mesh sandwiched between the two coats
  • Apply at least 3 mm of upper coat material on top of the base coat